Industrial Fittings

Plate Flanges, which are of wide variety, are manufactured mainly from plates. They are conforming to national & international standards and they are hubless. Plate flanges are produced from quality mill plates. Before cutting pieces out of plates, each plate is checked for serious laminations. They should be virtually free of voids, non-metallic inclusions and other defects. Another important property of plate is its weldability & hardenability. For more critical application of flanges, the hardness, strength and impact properties are also important factors. These properties vary through, along and across the section of the product as a result of temperature and microstructural variations during hot rolling, cold rolling or quenching and cooling.
Steel can be combined with other metals to form alloys, which can make them corrosion resistant, stronger or lighter.

Forging is the process by which metal is heated and is shaped by plastic deformation by suitably applying compressive force. Usually, the compressive force is in the form of hammer blows using a power hammer or a press. The forgings and consequently, the forged flanges are inherent corrosion resistance. Forging refines the grain structure and improves physical properties of the metal. With proper design, the grain flow can be oriented in the direction of principal stresses encountered in actual use. Physical properties (such as strength, ductility and toughness) are much better in forging than in the base metal which has, crystals randomly oriented. Forgings are fully dense and homogeneous and not subjected to discontinuities, like porosity. Flanges, made in such way, are stronger, offer better response to heat treatment, yields lower scrap and greater productivity.

Efficient piping systems form the heart of process industries & such system require specialized pipe fittings which have full pipe strength, are perfectly round, wrinkle-free, rugged, leak-proof and corrosion resistant. Our fittings meet these needs. Therefore, our pipe fittings are subjected to strict in-process inspection at each stage of the production process - from raw materials handling to finished product shipping. They are visually examined for conformity to company''s specifications and tested under the applicable codes and standards. Our pipe fittings are subjected to strict testing and examination as per the applicable codes and standards. Upon request, we will call in independent third party inspection agencies. Applicable Standards: ASTM A234 - Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and Elevated Temperatures. ANSI B16.9 - Facttory-made Wrought Steel Buttweld Fittings.

We manufacture superior quality forged socket welding and screwed fittings that ensure smooth flow of the liquid in the channel. These sockets are generally used in demanding environment of chemical industry and power plant. High in durability, these stainless steel socket weld fittings and screw provide a sturdy, tight integral line system.

Ball Valves are the mostly used in the Process Industries. The compact design of our valves will give you a product which will suit your requirements perfectly. We have paid attention to the design of all aspects of the product even the 'so-called' minute ones. Ball Valves are quarter-turn, straight through flow valves. Some of the salient features are:

•       Compact design
•       Interchangeable parts
•       Blow out proof stem
•       Low torque
•       Mirror finish ball
•       Studs & nuts of S.S.
•       Designed for easy maintenance
•       Smooth operation.
•       Excellent control
•       Tight shut-off
•       Low installation cost
•       No routine maintenance

The fast changing world and sophisticated application have made the valve industry more vigilant and product innovation and technological marvels have become prime concern for the valve industry to match the demand. Application being very critical in terms of working under extreme heat and pressure, the valves have to be accurate, giving good performance and long lasting. Valves are also required to be designed for client''s special requirements like extended spindle, locking device, anti-static device, fire safe design, actuator mounting etc.

Cast Iron (also known as Gray Iron) material is relatively easy and inexpensive to make. It has lower tensile strength and lower ductility. In close grained cast iron, a large part or all of the carbon is in the form of flakes or nodules of graphite. Cast Iron material is used where tensile strength is non-critical. The valves made out of Cast Iron material is widely used in fluid handling systems for river water irrigation and sewerage systems, public ultilities, water lines and industrial plants.

We manufacture superior quality of valves that are used to seal the joints between pipe and flanges. We also offer our clients customization of these fittings to suit their specific industry needs.

Body & Steam protected from service fluid A Butterfly Valve is a type of flow control device, typically used to regulate fluid flowing through a section of pipe. The valve is similar in operation to a ball valve. It is from a family of valves called quarter turn valves. Some of the salient features are: