Screwed Ball Valves,Flanged Butterfly Valve,Flanged Ball Valves,Double Flanged Butterfly Valve,India

Ball & Butterfly Valves

Ball Valves are the mostly used in the Process Industries. The compact design of our valves will give you a product which will suit your requirements perfectly. We have paid attention to the design of all aspects of the product even the 'so-called' minute ones. Ball Valves are quarter-turn, straight through flow valves. Some of the salient features are:

Compact design
Interchangeable parts
Blow out proof stem
Low torque
Mirror finish ball
Studs & nuts of S.S.
Designed for easy maintenance
Smooth operation.

A Butterfly Valve is a type of flow control device, typically used to regulate fluid flowing through a section of pipe. The valve is similar in operation to a ball valve. It is from a family of valves called quarter turn valves. Some of the salient features are:

Excellent control
Tight shut-off
Low installation cost
No routine maintenance
Body & Steam protected from service fluid

Screwed Ball Valves

Material: S.S. ASTM A 351 GR, CF8 / CF8M, C.S. ASTM A 216 GR. WCB, M.S. / C.I. IS 210 GR. FG 200
Design: One Piece Design
Mfg. Std.: BS 5351
Testing Std.: BS 6755 PART-I
Ends: Screwed Ends / Socket Weld Ends To ANSI B16.11 / Flanged Ends To 150#
Rating: 150#

Ask for Quote

Flanged Ball Valves

Material: S.S. ASTM A 351 GR, CF8 / CF8M, C.S. ASTM A 216 GR. WCB, M. S. / C. I. IS 210 GR. FG 200
Design: Three Piece Design
Mfg. Std.: BS 5351
Testing Std.: BS 6755 PART-I
Ends: Screwed & Socket Weld To ANSI B16.11 / Flanged Ends To 150#
Rating: 150#

Ask for Quote

Flanged Valves

Material: S.S. ASTM A 351 GR, CF8 / CF8M, C. S. ASTM A 216 GR. WCB, M. S. / C. I. IS 210 GR. FG 200
Design: Two Piece Design
Mfg. Std.: BS 5351
Testing Std.: BS 6755 PART-I
Ends: Flanged ends to 150#
Rating: 150#

Ask for Quote

Butterfly & Check Valves

Type:Wafer Type
Moc:

IS 210 Gr. FG 200
ASTM A351 GR. CF8
ASTM A351 GR. CF8M
ASTM A216 GR. WCB

Disc:

IS 210 Gr. FG 200
IS SG 400
ASTM A351 GR. CF8
ASTM A351 GR. CF8M
ASTM A216 GR. WCB (POWDER OR NICKEL COATED)

Lining:

NITRILE
E.P.D.M.
SILICON
HIPLON
VITON

Seat:

E. P. D. M.
PTFE TEFLON
NEOPRENE
SILICON
HIPLON
VITON

Shaft:

AISI 410
AISI 304
AISI 316

Testing: BS 6755-1
W. Press: 12 BAR
Ends: Wafer Type
For Check Valve: E.P.D.M. 'O' RING

Ask for Quote

Double Flanged Butterfly Valve

Moc: IS 210 Gr. FG 200 / ASTM A351 GR. CF8 / ASTM A351 GR. CF8M / ASTM A216 GR. WCB
Design:Offset Disc Design
Body Seat: AISI 304 / AISI 316
Disc: IS 210 Gr. FG 200 / IS SG 400 / ASTM A351 GR. CF8 / ASTM A351 GR. CF8M
Body Seat: AISI 304 / AISI 316
Disc Seat: E. P. D. M.
Shaft: AISI 410 / AISI 304 / AISI 316
Testing: BS 6755-1
W. Press: 12 BAR
Ends: Double flange type, Flanges drilled to IS 1538
Construction: AWWA C-504 / BS 5155 / IS 13095
Also available offset disc design wafer type butterfly valves

Ask for Quote